Opticon OPN2005 Especificaciones descargar pdf (Pagina 21)

OPN-2005

Specifications Manual

10. Durability

10.1. Ambient Light Immunity

Scanning performance is guaranteed when the range of illumination on a barcode surface is

the following values.

Incandescent light : 0 ~ 4,000 lx

Fluorescent light : 0 ~ 4,000 lx (excluding high-frequency lighting)

Sunlight : 0 ~ 80,000 lx

Barcode Test Sample OPTOELECTRONICS test chart

PCS = 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet Zone

10 mm, N/W Ratio = 1:2.5

Distance 100 mm from the front edge of the scanner.

Angles Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°

Curvature R = ∞

Power Voltage 3.7 V

* Be sure that the direct light or specular reflection from the light source does not enter the

light receiving section of the OPN-2005.

10.2. Vibration Strength (without packing)

There shall be no sign of malfunction after the following vibration test.

Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an

accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the

non-operating state. Repeat this in each X, Y and Z direction.

10.3. Vibration Strength (in individual packing)

There shall be no sign of malfunction after the following vibration test. OPN-2005

Specifications Manual

Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an

accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in

individual packaged state. Repeat this in each X, Y and Z direction.

1 2 ... 16 17 18 19 20 21 22 23 24 25

Sin comentarios

Opticon OPN2005 Especificaciones Pagina 21